Midea HD-676REWN Service Manual Download Page 2

Page: 2 / 57

Service Manual_2020-V3.0

WARNING

Important Safety Notice

There are special components used in this equipment which are important for safety. These parts are

marked by

in the Schematic Diagrams, Circuit Board Diagrams, Exploded Views and Replacement

Parts List. It is essential that these critical parts should be replaced with manufacturer’s specified parts to

prevent shock, fire or other hazards. Do not modify the original design without permission of

manufacturer.

WARNING

Important Safety Notice

The Maintenance Manual is only for the use of maintenance personnel with certain experience and

background in electrical, electronic and mechanical field.

Any attempt to repair main devices may lead to personal injury and property loss.

Manufacturers or distributors are not responsible for the content of the Manual and interpretation thereof.

Midea Refrigerators

Technical Maintenance Manual

written approval by the Overseas Sales Corporation of Midea Refrigerators.

Summary of Contents for HD-676REWN


























































Search results

Summary of Contents for HD-676REWN

Reviews:

Related manuals for HD-676REWN

Brands by name

Popular brands

Midea HD-676REWN, Service Manual

Search results

Summary of Contents for HD-676REWN

Reviews:

Related manuals for HD-676REWN

Brands by name

Popular brands