OPTIONAL HANG BRACKET INSTALLATION (HANG-MMRXX)
NOTE:
THE CABINET MUST BE INSTALLED PLUMB AND LEVEL FOR PROPER OPERATION.
NOTE:
A sheetrock wall mounted to wood studs on 16” centers is required for installation.
1) Locate studs behind sheetrock wall.
2) Align rear mounting holes in hang bracket with
studs. Refer to Mounting Dimensions on Page 6
for mounting hole locations.
3) Secure bracket to studs in wall using all mounting
holes (mounting hardware not supplied).
(FIGURE B)
NOTE:
A minimum of 6” clearance above cabinet is
required.
4) Carefully lift rack and place on hang bracket tabs.
(FIGURE C)
NOTE:
Hang bracket tabs will align with tab holes in rack.
S heetrock
Studs
Min. 6 ”
C learance
Required
A b ove And
Below
R ack
Hang B racket Slots
r
J
FIGURE B
FIGURE C
Hang B racket
Page 8
