4) Insert bushing in upper pivot bushing hole on top of rack.
(FIGURE F)
5) Lift rack and place bottom on the edge of backpan. Position
rack so as to engage the lower pivot bushing on backpan.
(FIGURE G)
6) Thread lower pivot pin into lower pivot bushing. Hand
tighten fully and then back out one turn.
(FIGURE G)
Backpan
L ow er Pivot
FIGURE G
Bushing
FIGURE I
Pivot
Bushing
U pp er Pivot Pin
U pper Pivot
Bushing
S e curity Clip
P ivot Pin
FIGURE F
FIGURE H
L ow er Pivot Pin
7) Pivot rack into backpan and align with upper pivot bushing.
(FIGURE H)
8) Thread upper pivot pin into upper pivot bushing. Hand
tighten fully and then back out one turn.
(FIGURE H)
9) Install security clips in upper and lower pivot pins to
prevent removal of pivot pins from exterior of enclosure.
(FIGURE I)
U pp er and Low er
S e curity Clips
Page 11
OPTIONAL BACKPAN INSTALLATION (CONTINUED)
