Midas LEGEND 3000, Operator'S Manual

Page: 54 / 84

Editing Midi Output Message:
1/ Pressing the MIDI switch places you in the MIDI menu.
2/ Using the UP and DOWN switches scroll through OUT01 to 04 until the required message is reached. (On
the Legend there are a maximum of 4 MIDI out messages that can be sent per recalled scene). Press
CONFIRM.
3/ Using the UP and DOWN switches scroll through the menu until the screen reads the MIDI Out protocol
you wish to send and press the CONFIRM switches.
4/ The window will read CH00. Using the UP and DOWN keys choose the MIDI out channel you wish to send
the message on, between 01 to 16 can be selected. Press CONFIRM.
5/ If you have selected Program Changes the window will display P000. Using the UP and DOWN switches, a
program change between 00 and 127 may be selected. Press CONFIRM and you will be dropped back to the
first level of the menu.
If you have selected a NOTE ON/OFF message C-2 will be displayed. Using the UP and DOWN switches
until the desired Note is displayed and press CONFIRM. The display will then show V000. Select the
required Velocity. Press CONFIRM and you will be dropped back to the first level of the menu.
6/ When the desired messages have been edited press the MIDI switch again to drop out of the menu.
7/ To then store the MIDI information with the Scene, the STORE switch must be pressed followed by
CONFIRM.
44