Midas LEGEND 3000, Operator'S Manual

Page: 34 / 84

10
10
5
5
0
20
30
40
50
dB
r
r
l
l
pan pan
1 group 2
MUTE MUTE
SOLO SOLO
SIS
SIS
ST ST
MONO MONO
Group Section
The PAN defaults to control the
placement of the group signals within
the master stereo mix and has a constant
power law. i.e. - 3dB at the centre
position.
When SIS is active the pan control is
changed so as to place the group within a
three speaker system.
The MONO switch connects the post
fader group signal to the mono master
bus.
The ST switch connects the post fader
group signal to the master stereo bus via
the pan control.
The MUTE switch mutes the group
signal path at all points after the insert
send. The switch can be controlled from
snapshot automation.
The SOLO switch sends group signals to
the MON PFL/AFL busses and the FOH
PFL/AFL stereo busses. If the switch is
pressed for a short time it will latch on or
off, but, if it is held on for more than 1
second the latching is disabled and when
the switch is released the channel solo
will turn off. As a default the solo system
is auto cancelling so each new solo
cancels the last. The SOLO ADD mode
switch on the master module defeats the
auto cancelling and allows multiple
channel monitoring.
The group FADER provides adjustment
of the group levels from + 10dB to off.
24