Midas LEGEND 3000, Operator'S Manual

Page: 51 / 84

act scene
aux /
check
mute
Group
store
a
b
active system
(hold 3secs)
lock s-i-p
midi system
delete copy insert
check confirm cancel
now
down
next
act/scene
c/o
last
up
1
3
5
7
9
11
2
4
6
8
12
10
mon
mute
(hold
3secs)
(hold
3secs)
vca
mon
v.c.a./
Mute/
2 To enter the ASSIGNMENT mode, first press the LOCK switch
(to un-lock the assignment system) so that the LED is off.
Assigning Automutes To The Monitor Path
3 To assign Automutes to the MONITOR signal path you must first
press and hold the MUTE button until the LED is
flashing. This indicates that the 10 LEDs on the input channel
now indicate assignment of MON Automutes to that channel.
1 To use Automutes on the FOH or Monitor signal path, you must
first select AUTO as the MUTE type in the SYSTEM
Menu:
Press SYSTEM and using the UP/DOWN buttons scroll to
MUTE, press CONFIRM
Using the UP/DOWN switches select AUTO on the display and
press CONFIRM.
The Mute switches above the Master VCAs are now
Automute masters.
41
4 Enable the switches to assign the set up required. A long press will
allow multiple assignments and a short press will clear the
previous assignments.
5 Press the SET switch on the input channels for which the
assignments are required. The SET switch works in two different
ways. A long press will replace all previous settings with the new
assignments, a short press will toggle between the original and
the new assignments.
6 To enter CLEAR mode set all the assign keys to off. To do this
simply press the ones that are illuminated which will then toggle
them off. Then press the SET keys on the channel that need no
assignment.