Microwave Data Systems iNET 900 Series, User Manual

Page: 46 / 180

38 MDS iNET 900 Series User’s Guide MDS 05-2806A01, Rev. E.1
•
Radio Configuration
—Tools to configure the wireless (radio)
layer of the transceiver. ( See “Radio Configuration Menu” on
Page 48 )
•
Serial Gateway Configuration
—Tools to configure the two serial
ports. ( See “Serial Data Port Configuration Menu” on Page 59 )
•
Security Configuration
—Tools to configure the security services
available with the transceiver’s environment. ( See “SECURITY
CONFIGURATION” on Page 73 )
•
Device Information
—Top level user-specific and definable param-
eters, such as unit password. ( See “Device Information” on
Page 38 )
•
Performance Information
—Tools to measure the radio and data
layer’s performance of the radio network. ( See “Performance
Information Menu” on Page 76 )
•
Maintenance/Tools
—Tools to use configuration files, change
firmware and use Authorization Keys to change major unit
capabilities. (
See “ Authorization Key —Alter the unit’s overall
capabilities by enabling the built-in resources.
(See “Authorization Keys Menu” on Page 105)” on Page 91
)
3.3.3 Configuring Basic Device Parameters
Device Information
Below is the menu/screen that displays basic administrative data on the
unit to which you are connected. It also provides access to some user-
specific parameters such as device names.
Figure 3-11. Device Information Menu
•
Model Number (Display only)
•
Serial Number
(Display only)
•
Hardware Version (Display only)
•
Firmware Version
(Display only)
—Current firmware installed and
being used by the transceiver.