68
MDS iNET 900 Series User’s Guide
MDS 05-2806A01, Rev. E.1
connection is closed, or the link is interrupted. In this mode, the trans-
ceiver behaves the same, whether it is an Access Point or a Remote.
(See
Figure 3-31
and
Table 3-1
)
NOTE:
The TCP session has a timeout of 10 minutes (600 seconds). If
inactive for that time, it will be closed. The transceiver will
offer the port again for connection after this time expires.
Establishing a
Connection
From the PC, establish a TCP connection to the IP address of the
Remote transceiver and to the IP port as configured above (30010—
COM1, 30011—COM2). A Telnet client application can be used to
establish this connection. Data can now be sent between the PC and the
RTU or other connected device.
Invisible place holder
Figure 3-31. IP-to-Serial Application Diagram
3.6.7 Point-to-Point Serial-to-Serial Application
Example
Once the transceivers are configured and the changes have been exe-
cuted, they begin processing any data presented at the
COM
ports. Data
presented at the Access Point’s
COM
port will be packetized and sent via
UDP to the Remote. Upon receiving the packet, the Remote strips the
data out of the UDP packet and sends it out its
COM
port. Likewise, data
presented at the Remote’s
COM
port is packetized, sent to the Access
Point, stripped, and sent out the Access Point’s
COM
port. Note, this
configuration does not use multicast addressing.
Ethernet
Crosssover
RTU
EIA-232
Computer
or Network
192.168.0.10
192.168.0.1
192.168.0.2
LA
N
COM
1
COM
2
PW
R
LIN
K
Remote
Access Point
Table 3-1. Serial Port Application Configuration
IP-to-Serial Connection
Transceiver
Location
Menu Item
Setting
Access Point
None is required
None is required
Remote Unit
IP Address
192.168.0.2
Status
Enabled
IP Protocol
TCP
Baud Rate
9,600 (Example)
Flow Control
None
Local IP Port
30011
Summary of Contents for iNET 900 Series
