manualshive.com logo in svg

MicroTransponder 2100, Manual

Share
Download
MicroTransponder 2100 Manual Download Page 11

26-0002-0005/0 (en) (2022) 

11  

 

2.2  How to Use the Stroke Application & Programming Software (SAPS) 

The SAPS has been pre-installed on the commercially available laptop provided. 

1.  Position the laptop within 1 m of the IPG implanted in the patient’s left chest.  

2.  Turn the laptop on (Typically the ON button is directly below the laptop screen on the front 

left, as shown above in Figure 2.1:, although it may also be on the front right or side of the 
computer; press down).  

3.  The laptop will power up in the “

microtransponder

” login state. Log into the computer 

using the password provided.  

CAUTION: If the laptop does not automatically launch the SAPS, then please reboot your 

computer and re-launch SAPS (see Section 13 Troubleshooting ). If this does not 
correct the issue or you have additional problems, please contact MicroTransponder per 
Section 18: Information and Support. 

. 

4.  The SAPS loaded onto the laptop will then launch to the Startup Menu Screen (

Welcome

 

menu) (see Figure 2.22). Before proceeding to the next section, ensure that you have 
arrived at this Startup Menu Screen. 

 

Figure 2.22: Startup Menu Screen—Welcome Menu 

CAUTION: If the computer does not display the Startup Menu Screen, see Section 12: 

Precautions, Warnings, Contraindications, and Hazards and Section 13: 
Troubleshooting before proceeding. 

For proper operation and communication, the USB plug of the WT must be plugged into a USB 
port of the laptop. The WT should be positioned within 1 m of the implanted IPG for proper 
communication. The 

Interface

 indicator on the SAPS user interface screen will be green in color 

Summary of Contents for 2100
































































Reviews:

No comments

Brands by name

Popular brands

Load more brands