manualshive.com logo in svg

Microtek ScanWizard Pro, Reference Manual, Page: 97 / 177

Share
Download
Microtek ScanWizard Pro Reference Manual Download Page 97

Reference: The Settings Window         89

Brightness and Contrast tool 

(Native Color Mode only)

The Brightness and Contrast tool changes the brightness, contrast of the entire
image.

Brightness

The Brightness 

Brightness 

Brightness 

Brightness 

Brightness control lets you change the brightness setting. Too much

brightness can make an image look washed out.

Contrast

The Contrast 

 Contrast 

 Contrast 

 Contrast 

 Contrast control lets you change the contrast setting.

• High contrast can make an image look like a photocopy of a picture with

little or no gray shades.

• Low contrast can make an image look dull and flat.

• Very low brightness levels can make an image look very dark.

Individual channel adjustment for brightness/contrast is not supported. For
RGB color image, the same effect applies to all channels. For Lab color image,
brightness and contrast applies to L (Lightness) channel only.

Summary of Contents for ScanWizard Pro


















































































































































































Reviews:

No comments