调高器说明书
Usually,
the I/O of the CNC system is in manual control mode
of t
he height controller.
When processing
starts, the I/O
of the CNC system will turn t
o aut
omatic control mode of
the height controller.
In such mode, the mecha
nical lifting device of the height controller is
under automatic height control.
4.3 Operation via communication interface of CNC system (RS232
communication mode)
This feature is under development and will be amended aft
er the functions are completed.
4.4
Operation Flow
Flow starts
Arc
voltage
detection m
ode
capacitance
For mechanical installation,
see 3.1 and connection of
capacitance sensor is
required.
For mechanical installation,
see 3.1 and connection of
capacitance sensor is
required.
For electrical connection in
arc voltage mode, see 3.3
For electrical connection in
capacitance mode, see 3.2
Power
on
and
set
the
detection
mode
to
arc
voltage
mode,
see
5.1
and 7.1
Power on and set the
detection mode to
capacitance mode, see
5.1 and 7.1
The flow ends.
28
PDF 文件使用 "pdfFactory Pro" 试用版本创建
www.fine
print.com.cn