调高器说明书
Note: The pins without pin numbers will not be used.
Table 3-5 Pin definitions of J2 connector
Note: Push t
he orange button inwards and insert the
stripped cable into the wiring hole
and t
hen release.
Table 3-6 Pin definitions of J3 connector
The volt
age divider board
may choose installation position as required,
but note sho
uld be taken J1 interface is for low-voltage signal and J2
is for high-voltage signal. In order to prevent low-voltage signal from
any
interference of high-voltage
and high-frequency signals and
improve the system stability, the wirings of J1 and J2 should be
carried out separately.
24
PDF 文件使用 "pdfFactory Pro" 试用版本创建
www.fine
print.com.cn
No.
Attribute
Description
1
Power
supply
Ground
2
Input
Pla
sma arc voltage posit
ive terminal
(connect
ing t
o t
he clip of steel plate)
3
Input
Plasma arc vo
ltage negative termina
l (arc
voltage output)
No.
Attribute
Description
1
Power
supply
AC220V±10%
2
Power
supply
AC220V±10%