B. One spacer for skates with 8 mm axle
diameter.
C. One spacer for skates with 6,4 mm axle
diameter.
D.One distance ring.
And this instruction manual.
The different components of your
speedometer are shown in picture 1.
A) Outer spacer
B) Ring spacer
C) Cylindrical spacer
D) Distance ring
3. Skating accidents can always happen,
even to experienced skaters. To avoid
serious damage always wear the com-
plete protective gear.
4. Skating needs the full attention of the
skater, so don’t let the Skate Speedo-
meter disturb you from the traffic
around you.
1. Components of the In-Line Skate
Speedometer
Before you start please check the com-
pleteness of your Speedometer package.
Your Speedometer consists of:
1.
A puck
, housing the skate computer.
The puck is approximately 1 cm high
and has a 5 cm diameter
2.
A skate wheel
with an internal magnet
3.
A watch like Display
The package contains five different spacers:
A.Two outer spacers to fit the In-Line Skate
Speedometer Wheel in wider frames.
Wheel
Puck
Display
Picture 1
Content of the packaging
A B
C D A
1
2
3
Microsport_Basic_11/02 11.11.2002 15:16 Uhr Seite 45
