Thank you very much for choosing the
MICROSPORT In-Line Skate Speedometer.
This Speedometer is recommended be-
cause of the easy installation and hand-
ling as well as its outstanding accuracy.
Don’t expose your Speedometer to direct
sunlight for a long period and protect the
display from extreme cold and hot tem-
peratures. Handle your display carefully
and keep it in a clean and dry state.
Before you start using your Speedometer
please read this operating manual careful-
ly. The actual installation procedure will
not take you longer than 10 minutes.
Attention:
1. The Skate Speedometer contains some
small components which can be swallo-
wed and can cause death by suffocation.
2. Always check the equipment before
skating. Check the bearings and the
fitting of the axle to avoid blocking or
loosening of a wheel.
In-Line Skate
Speedometer BASIC
Operating Instructions
1.
Components
of the In-Line Skate
Speedometer
2.
The keys
of the display and their
functions
3.
Installation
3.1. Installation of the Wheel
3.2. Display and Wheel Size
4.
Operating
the In-Line Skate
Speedometer
5.
Changing of the Batteries
5.1. Changing the display battery
5.2. Changing the battery of the computer
puck
6.
Trouble Shooting
7.
Remarks
8.
Warranty
Microsport_Basic_11/02 11.11.2002 15:16 Uhr Seite 43
