Your In-Line Skate Speedometer offers
you the following functions:
SPD
actual speed
MX SPD
maximum speed
AV SPD
average speed
TRP TIME
trip time
TRP DST
trip distance
DST
total distance
PM
wheel wear rate
ATTENTION! If you stop skating and the
In-Line Skate Speedometer Wheel is not
turning for more than 60 seconds your
Speedometer switches off automatically
and changes to the viewing mode.
Please keep in mind that the
START
-,
SET
-
and
RESET
-Buttons are disabled while the
system is in the Data-Mode. Pressing one
of these buttons has no effect at that time.
Viewing Mode
To enter the Viewing Mode press
MODE
in the Sleeping Mode (when the display
is blank).
If the connection could not be estab-
lished correctly there might be two
reasons:
1. The puck is not transmitting.
The transmission of the puck is initiated
by the first turn of the In-Line Skate
Speedometer Wheel. Please ensure
that the wheel is turning or has been
turned shortly before you press the
START
-Button.
2. The battery power of the transmitter
and the receiver is not sufficient.
Please replace the batteries as explained
in section 5.
When the transmission is received suc-
cessfully the wheel icon is blinking con-
tinuously. By pressing
MODE
you can
switch through the different functions
of your skate speedometer.
Microsport_Basic_11/02 11.11.2002 15:16 Uhr Seite 67
