Microsonic TEL8018C, Manual

Page: 31 / 42

9
number position. If the number needs modifying use the keypad to enter digits or
R/C
key to delete.
4) Press
SET/OK
key to confirm and enter to choose melody, use
∧
or
∨
key to scroll through the
melodies, then press
SET/OK
key to confirm your selection.
Handset Menu function 2: CALL LOG
You can enter
CALL LOG
by pressing
SET/OK
key. And there are three items in this menu,
MISSED
,
RECEIVED
and
DIALED
.
When LCD displays CALL LOG, you can:
Press
SET/OK
key to confirm and press
∧
or
∨
key to select missed call lists, received call lists or dialed
call lists respectively.
1) The LCD will show the last record. (If no entries are available in the list, LCD will show
EMPTY
).
2) Press
∧
or
∨
key to view other records.
3) When the desired number is show, press or key to dial out the number automatically.
When the record is show, press
SET/OK
key, use
∧
or
∨
key to choose among
ADD TO PB?
DELETE? DELETE ALL?
Then press
SET/OK
key to confirm.
ADD TO PB :
this function allows the user to add an entry from the caller list to the phone book.
DELETE :
this function allows the user to delete the currently selected entry from caller list
DELETE ALL :
this function allows the user to delete all numbers.
Note:
In idle state, press
∧
key once to incoming records or press
∨
key to review outgoing records.
Handset Menu function 3: BS SETTINGS
The user is able to change the base settings in base settings item, in standby mode, press
SET/OK
key and
use
∧
or
∨
key to select this item. Then you can do below:
„ To delete handset
This function allows the user to delete a handset registration from the base.
1) Press
SET/OK
key, the first show is
DELETE HS
.
2) Press
SET/OK
key to enter; the user will be prompted to enter the PIN code.
3) Input the correct 4-digit pin code using numeric keys
（
the default PIN code is 0000
）
.
4) Press
∧
or
∨
key to scroll the handset names list up and down.
5) Press
SET/OK
key to confirm. The delete handset will be deleted from the list on registered handsets
on the base, and the handset will behave according to the out of range condition.
6) After you delete the handset, you will not be able enter base settings menu in idle mode.
Note:
In idle mode, press and keep key for 6s, then press key 7 times swiftly, then all the handsets
logout the base successful.
„ To set dial mode (Tone/Pulse)
The user can select to change the mode will dial, the default is TONE.
1) Press
SET/OK
key, then using
∧
or
∨
key to select
DIAL MODE
item.
2) Press
SET/OK
key to enter, and the display shows
TONE
.
3) Press
∧
or
∨
key to select the
TONE
or
PULSE
dial mode.
4) Press
SET/OK
key to confirm your selection.
Note:
According to your telephone lines or PABX systems you may need to change the dialing mode
between Tone and Pulse.
„ To set flash time