M7 Stationary HD Megapixel IP Camera Series
User Manual
© 2001 - 2016 Microseven Systems, LLC
Page | 25
3.1.13.3
Record Schedule
Recording schedules can be set for specific days of the week, intervals, or durations.
1.
Check the ‘Schedule Rec Enable’ box.
2.
Use the dropdown menu to select a day of the week to schedule a recording.
3.
Set from 1 to 4 time duration blocks for the day’s recording.
4.
Check ‘Apply to everyday’ if you wish to copy the current setting to all days of the week.
5.
Click ‘Apply’ to save the settings.
Tip: The Record Schedule tab is Motion detection settings are found under the Detection tab.
3.1.13.4
Record Options
The Record Options tab is used to control motion and 24x7 recording.
1.
Enter a recording file length between 15-900 seconds.
2.
Choose the recording stream (primary=default, secondary, or tertiary).
3.
Click ‘Apply’ to save the settings. Changes to the recording stream type will cause the camera to
reboot automatically after clicking ‘Apply’.
3.1.14
User Accounts Tab
M7CMS provides three levels of users including: 1) Administrator (superuser), 2) User and 3) Guest. The
Administrator is the only user who can change the properties of the camera. User and Guest are
permitted to view the video stream.
1.
Enter the User or Guest username and password.
2.
Re-type the password to confirm the entry.
3.
Click ‘Apply’ to save the settings and close the dialog.
Note: In addition to a space, the following eight characters cannot be used in the password: $ = “ \
# % + ? \
3.1.15
System Tab
3.1.15.1
Storage
M7CMS displays SD card information including Status, Total Size, and Free Size. Power off the camera
before installing the MicroSD card. The maximum capacity is up to 128 GB MicroSD card as SDHX.
3.1.15.2
Firmware Upgrade
The Firmware Upgrade window displays camera Device type, Cam ID, PIN code, and Firmware version.
Refer to Section 1.2 for detailed instructions on performing a firmware upgrade.
3.1.15.3
System Log
User actions and warning messages are displayed on the System Log tab.
Click ‘Reset’ to clear the log
records.
