CLI Commands
46
098-00777-000 Rev. A
Example 3:
S80> ping ipv4 10.60.132.71
Response 3:
Ping 10.60.132.71 FAILED
reboot
This command restarts the S80 system. Using this command can cause a loss of outputs.
Command Syntax:
reboot
Level
: Admin only
Example:
Reboot
Response :
S80> reboot
System is going to reboot
The system is going down NOW!
Sent SIGTERM to all processes
TERM
Sent SIGKILL to all processes
Requesting systRestarting system.
U-Boot 2010.03-00002-gb955030 (May 26 2015 - 08:55:58)
CPU : SmartFusion2 SoC (Cortex-M3 Hard IP)
Freqs: CORTEX-M3=166MHz,PCLK0=83MHz,PCLK1=83MHz
Board: Falcon Rev 1A, www.microsemi.com
SW : Rev 1.2.8
DRAM: 128 MB
In: serial
Out: serial
Err: serial
Net: RWI_MAC
Hit any key to stop autoboot: 0
Summary of Contents for SyncServer S80
