Microsemi SyncServer S80, User Manual

Page: 43 / 74

SyncServer S80 NTP User Guide
098-00777-000 Rev. A 43
Apr 17 11:56:52 S80 local4.notice syslog: 181, index = 000, ALARM SEVERITY: EVENT,NTP
Passive mode
Apr 17 12:27:52 S80 local4.notice syslog: 181, index = 000, ALARM SEVERITY: EVENT,NTP
Passive mode
Apr 17 12:45:55 S80 local4.notice syslog: 157, index = 002, ALARM SEVERITY:
EVENT,NO_SATS_GT60
Apr 17 21:54:53 S80 local4.notice syslog: 181, index = 000, ALARM SEVERITY: EVENT,NTP
Passive mode
……………..
Example 2:
S80> show log command file-index 0 tail 10
Response 2:
Apr 18 11:32:50 S80 local5.info syslog: [user: root]: show clock
Apr 18 11:33:44 S80 local5.info syslog: [user: root]: show alarm
Apr 18 11:35:02 S80 local5.info syslog: [user: root]: show status
Apr 18 11:39:05 S80 local5.info syslog: [user: root]: show snmp trapuser
Apr 18 11:39:08 S80 local5.info syslog: [user: root]: show snmp user
Apr 18 11:40:11 S80 local5.info syslog: [user: root]: show alarm-config
Apr 18 11:45:02 S80 local5.info syslog: [user: root]: show log alarm-event file-index 0
head 10
………………..
Example 3:
S80> show log diag state
Response 3:
Diagnostics Logging State : Enable
set log
Use this command to provision the state of debug message sent out to the debug log.
Command Syntax:
set log diag state <enable|disable>
Level
Config, and Admin
Example:
set log diag state enable
show log-config
This command displays the configuration for log size.
Command Syntax:
show log-config size {alarm-event | command | security}
Level
User, Config, and Admin
Example 1:
S80> show log-config size alarm-event
Response 1:
Log size of alarm-event is : 100 kilobytes
Example 2:
S80> show log-config size command
Response 2:
Log size of command is : 100 kilobytes
set log-config
Use this command to provision the specified log file buffer size, the maximum number of kilobytes to be
stored in the file before it is rotated. The range is 1 to 100 kilobytes, with a default of 100 kilobytes.