_________________________________________________________________________________________ DS3106DK
15
4.11
Register View Window
When the
Register View
button in the upper-right corner of the main window is pressed, the
Register View
window appears (
). In this window the DS3106’s entire register set can be viewed and manually written
as needed.
The large grid that takes up most of the window displays the DS3106 register map. For each register, its
hexadecimal address in square brackets is followed by its register name and its contents in two-digit hex format.
When a register is clicked in the main register grid, its register description and fields are displayed at the bottom of
the window. Due to the limited speed of the serial port, the demo kit software does not continually poll every
register and does not make real-time updates to the data displayed on the
Register View
screen. Registers can be
manually read as described below.
The
Register View
window supports the following actions:
•
Read a register.
Select the register in the register map.
•
Read a register field.
Select the register in the map or the register field at the bottom of the window.
•
Read all registers.
Press the
Read All
button.
•
Write a register.
Double-click the register name in the register map and enter the value to be written.
•
Write a register field.
Select the register, double-click the field, and enter the value to be written.
•
Write a multiregister field.
Double-click one of the register names and enter the value for the field.
Figure 4-4. Software Register View Window
