Microscan Vision HAWK, Manual, Page: 33 / 60

Setting Up a Job in AutoVISION
System Co
mpo
nent
s
2
Vision HAWK Smart Camera Guide 2-23
Click the lock icon to take control of the camera. When you have
control of the camera, the
Modify button will appear beneath the
camera settings. Click the Modify button to adjust camera settings.
Note: The default IP address of the camera is: 192.168.0.10 . Be sure
your PC is on the same subnet ( 192.168.0.100 , for example).
Important: When modifying camera settings, you will need to enter a
username and password for the camera. The default username and
password are:
–
Username: Microscan
– Password: vision
Modify camera settings in the
Details area at the left of the
Connect view.
Create , Load , or Upload a job
using the buttons in the center
of the Connect view.