manualshive.com logo in svg

Microscan Vision HAWK, Manual, Page: 11 / 60

Share
Download
Microscan Vision HAWK Manual Download Page 11

Vision HAWK Smart Camera Guide

2-1

2

System Co

mpo

nent

s

2

CHAPTER 2

System Components

This section contains information about system components as well as 
information to help you connect the Vision HAWK Smart Camera. Specific 
information describes connectors, adapters, cables, pinouts, and signals.

Note: There are no user-serviceable parts inside.

Hardware Components

Table 2-1 lists Vision HAWK Smart Camera hardware components.

TABLE 2–1.

Vision HAWK Smart Camera Hardware Components

Part Number

Description

Cameras

GMV-6800-1000G

Vision HAWK, SXGA, AutoVISION, C-Mount

GMV-6800-1002G

Vision HAWK, SXGA, Auto Visionscape, C-Mount

GMV-6800-1010G

Vision HAWK, WVGA, AutoVISION, C-Mount

GMV-6800-1012G

Vision HAWK, WVGA, Auto Visionscape, C-Mount

GMV-6800-1110G

Vision HAWK, WVGA, Built-In Light, AutoVISION, 15° Lens

GMV-6800-1210G

Vision HAWK, WVGA, Built-In Light, AutoVISION, 30° Lens

GMV-6800-1310G

Vision HAWK, WVGA, Built-In Light, AutoVISION, 45° Lens

GMV-6800-1112G

Vision HAWK, WVGA, Built-In Light, Auto Visionscape, 15° Lens

GMV-6800-1212G

Vision HAWK, WVGA, Built-In Light, Auto Visionscape, 30° Lens

GMV-6800-1312G

Vision HAWK, WVGA, Built-In Light, Auto Visionscape, 45° Lens

Summary of Contents for Vision HAWK





























































Reviews:

No comments