Microscan Vision HAWK, Manual, Page: 29 / 60

Status Indicators
System Co
mpo
nent
s
2
Vision HAWK Smart Camera Guide 2-19
Status Indicators
The top of the Vision HAWK Smart Camera has multiple LEDs that indicate
different trigger, inspection, camera, communication, and power states.
Additional User Feedback
• Green Flash – A green flash from the front of the unit indicates a Good Read.
• Red X Targeting Pattern – The red X targeting pattern from the front of
the unit allows the user to center an object in the camera’s field of view.
• Beeper – The beeper is an audible verification that either a Pass or a
Fail has occurred.
TRIG
On Steady Continuous Trigger
Off Waiting for Trigger Event
On Flashing Trigger Event
PASS/FAIL
On Active State
Off Inactive State
MODE
On Steady Unit Ready
Off Unit Not Ready
LINK/ACT
On Steady Link Established
Off No Link/Activity
On Flashing Link Established and Activity on Link
PWR
On Power On
Off No Power Applied to Unit
OUTPUTS
On Signal Sent to External Output
Off No Signal Sent to External Output
TRIG = Trigger Status
PASS/FAIL = Inspection Status
MODE = Camera Status
LINK/ACT = Link Activity Status
Power Status
Outputs 1, 2, 3