Microscan Vision HAWK, Manual, Page: 32 / 60

Chapter 2
System Components
2-22 Vision HAWK Smart Camera Guide
– Mount the camera as required by the application.
– Connect the Ethernet cable from "B" on the camera to the
network.
– Connect the power supply to "3" on the QX-1.
– Connect the photo sensor to "T" on the QX-1.
– Connect the "Common" cable to "2" on the QX-1 and "A" on the
camera.
– Plug in the power supply.
2.
Select your Vision HAWK in the AutoVISION Connect view, create a
job, and adjust camera settings.
AutoVISION's Connect view allows you to select your device and
configure its settings, and to create a new job. The Select Device
dropdown menu provides a list of available devices. Hover the mouse
over a device to see its details.