LVS-95XX Series Barcode Quality Station Operations Manual
LVS-95XX Series Barcode Quality Station Operations Manual - English
Page 54 of 94
5. ISO/IEC Parameters Section
This section lists all of the measured parameters individually. These parameters are used to determine why
a barcode has a certain grade. There are numerous parameters listed, depending on the symbology. Use
the scroll bar to view the entire list of parameters.
At the top of this section is an information box that displays the decoded data. This data does not contain
any stop, start, or control (non-printable) characters. Check digits may or may not be displayed depending on
the symbology. For example, Code 128 mandates that they not be transmitted. The software always displays
the check digit for symbologies that make the transmission of check digits optional. To see special
characters or check digits, refer to the
Structure
tab chapter covered later in this manual.
Below the encoded barcode data, but still within the information box, is a Product Identification name for all
UPC-A, UPC-E, EAN-8 and EAN-13 barcodes that are contained within the Product Identification data file
(see
Setup Tab
|
System Settings
|
Product Identification (Lookup) File
for more information).
Decoded data
List of
parameters
