Micros Systems Workstation 4, Setup Manual

Page: 78 / 128

3-20 Workstation 4 Setup Guide
Installing and Operating the Workstation 4
Personality Swap
Starting at the top of Figure 3-11, position the CF card as shown with the lip
and label facing you, then insert it into the guides. When the card is properly
aligned in the guides as shown in the middle illustration, rotate it to the
position shown in the middle illustration, then push the card in until it is fully
inserted. It does not require a great deal of force to insert the card. If it does,
recheck the orientation of the card before proceeding.
8. Re-install the CF card bracket and fasten with the pair of screws.
9. Re-cable the replacement WS4. Reconnect each cable to the appropriate
I/O connector. When complete, this unit will be ready for use.
10. Install the CF card removed from the replacement WS4 in the inoperative
WS4 as described in Step 7. Replace the bracket and screws. Use the
packing material and re-box this unit for return to the depot repair center.