Microplex SOLID F90 HD Operator'S Manual Download Page 100

Page: 100 / 157

100 Operator Maintenance

_______________________________________________________________________________________________

________________________________________________________________________________________________

MICROPLEX

Operator’s Manual

SOLID F90 HD

Edition 1.0

7.1.2. Pre-Charger Cleaning

Turn off the printer and pull the power plug before start working at
the chargers.

1. Open the front cover of the printer.

2. Press down the open lever to open the waste toner recovery unit.

Waste toner recovery unit

Open lever (green)

3. Loosen the knurled screw of the pre-charger and pull out the

charger.

Pre-charger Knurled screw

Summary of Contents for SOLID F90 HD






























































































































































Search results

Summary of Contents for SOLID F90 HD

Reviews:

Related manuals for SOLID F90 HD

Brands by name

Popular brands

Microplex SOLID F90 HD, Operator'S Manual

Search results

Summary of Contents for SOLID F90 HD

Reviews:

Related manuals for SOLID F90 HD

Brands by name

Popular brands