54 Panel Functions
_______________________________________________________________________________________________
________________________________________________________________________________________________
MICROPLEX
Operator’s Manual
SOLID F90 HD
Edition 1.0
5.9. Page Length Adjustment
After inserting new material (e.g. paper) this function is used to
adjust the printer to the new page length. The default page length
value is 12 inches for Europe, 11 inches for North America.
ON LINE
SAVE
SAVE
SAVE
SAVE
MENU
SAVE
ON LINE
Panel display
[
SOLID F90 HD
]
[Menu Level 1 ]
(
(
(
[Paper Menu ]
[Stacker Select ]
(
(
(
[Page Length ]
[in Inch ]
(
(
(
[Digit4 12.00 ]
(
(
(
[Digit1 12.33 ]
[Save as Setup? ]
Notes
Turn the printer OFF LINE with this key.
Press one of the ARROW keys until
[Paper Menu ] is displayed.
Press the SAVE key to select the paper menu.
Press one of the ARROW keys until
[Page Length ] is displayed.
Press the SAVE key to adjust the page length.
Inch = currently selected measuring unit
(alternative the measuring units mm or 1/300
inch can be chosen with the ARROW keys).
Pressing one of the ARROW keys changes the
value of the current position (Digit 4 = left
digit, in this example: 1).
Pressing the SAVE key moves you to the next
digit (the MENU key moves you back).
Values from 7 to 24 inches are settable.
The page length is changed to 12.33 inches.
In addition this new value can be saved as
setup value (using the SAVE key), before the
printer is turned ON LINE again.
