26 Installation
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s
Manual
MICROPLEX iF60C
Edition 1.0
2.6. Installation of the Printhead
!
!
Only use consumables exclusively prepared for this printer.
Do not touch any fluidic coupling, the nozzle plate and the printing
side of the printhead with your fingers or any object which may
damage the sophisticated structures of this parts of the printer.
Do not remove consumables from the printer unless replacing them.
The prindhead should remain in the printer after its installation.
Every removal and reinsertion is not recommended unless
replacement is necessary.
1.
Make sure the printer’s power supply is turned OFF.
2.
Please open the top cover of printer.
3.
Take your new printhead and remove the protective foil.
4.
Now please check the sealing:
If the sealing of your printhead isn’t intact, do not use this
printhead. Please inform your supplier about this.
