Micronics LPM30 System Board Manual
10-2
Symptom 1
System locks up on bootup with the SoundDrive 16 installed.
Check
Check whether another peripheral in your system is using the same I/O
address configured by Jumper W3 (Chapter 2) on the SoundDrive 16.
Symptom 2
No sound output.
Check
1.
Is the external speaker properly connected to the SoundDrive 16 Speaker
jack?
2.
Is there another adapter in your system which may be using the same
address (I/O Address, DMA Channel, or Interrupt)? If so, change its
addressing or select another address for SoundDrive 16. (Refer to Chapter
2 for available addresses).
Symptom 3
Certain applications do not play sound.
Check
1.
Verify the SoundDrive 16 and the software application are configured for
the same sound emulation modes (for example, Sound Blaster or Sound
Blaster Pro for digitized sound).
2.
Many software applications require a large amount of base memory, such
as 640KB and are unable to operate if any drivers or TSR programs are
installed. Try removing all unnecessary drivers and TSRs or load them in
high memory (refer to your DOS user’s manual for more information).
3.
Verify the SET BLASTER statement is in the AUTOEXEC.BAT file.
