After you have removed the knockout, follow the steps below:
1.
Refer to the antistatic precautions described on page 2-1.
2.
Read the faxmodem module’s user manual and configure it for
installation.
3.
Turn the computer system off and remove its cover.
4.
Locate the fax connector illustrated in Figure 2-1.
5.
Insert the module with the bottom edge level to the connector (Figure
3-12). Never insert the module at an angle!
6.
Carefully push the module straight down, making sure it is fully inserted.
7.
Replace the computer cover.
Figure 3-12 Installing the Faxmodem Module
3-14
Micronics LPM30 System Board Manual
