cable to the joystick port and connect any MIDI devices to the appropriate
cables.
Microphone
You can connect a 300-600 ohm microphone to SoundDrive 16 audio control-
ler. Plug it into the MIC jack on the back of the LPM30.
Line In
You can connect an external mono or stereo audio source to the SoundDrive
16 audio controller, such as a tape player or radio. Use the appropriate
converter cable to interface to your external equipment.
Line Out
Allows you to connect the audio output of the SoundDrive 16 audio controller
to your home stereo, VCR, or amplified speakers.
Installing the Optional Faxmodem Module
The LPM30 supports an optional faxmodem module which can be ordered
from your dealer or directly from Micronics at (510) 651-2300.
Before installing the fax module, it is important to remove the knockout on the
back of the case so it may be plugged into the phone outlet (Figure 3-11).
Gently press against the knockout from the inside of the case until it is
perpendicular to the back of the case. Wiggle the knockout up and down until
it breaks free.
Figure 3-11 Removing the Faxmodem Module Knockout
3-13
Installing System Memory and Add-On Peripherals
