4-3
The BIOS Setup Utility
The LPM30 system board has two CMOS configuration screens: the Main
Screen (Figure 4-2) and the Extended Screen (Figure 4-3). To toggle between
the screens, press the PgUp/PgDn keys.
Figure 4-2 CMOS Main Screen
Now, configure the parameters to match your specific requirements. See the
following pages for procedures on how to set the computer’s parameters.
To change or view any of these parameters, press <Ctrl>, <Alt>, and <Esc>
simultaneously. This can be done at any time, but it is recommended after first
rebooting the system.
Setting the CMOS Parameters
Before running the computer, certain parameters on the CMOS configuration
screens must be set so the computer properly operates. First, set the
parameters on the CMOS Main Screen, then press the PgUp/PgDn key and set
the parameters on the CMOS Extended Screen.
Note:
Some of the parameters are already set and should not be changed. Only
change the settings if necessary.
