background image

 

32

 

 

ICMP Not Echo:

 Setup the ICMP echo Enable/Disable. This function can disable echo when someone 

pings this device, it can avoid hacker try to attack the device. 

Send Anonymous CID:

 click 

Yes

 for not sending the phones caller ID out. 

Send Flash Event:

 click 

DTMF EVENT

 or 

SIP INFO

 for the flash event. 

PPPoE Retry Period:

 Type the time in second for PPPoE to redial, if connection is failed. 

System Log Server:

 Type a server’s IP address for saving system log. 

System Log Type:

 Select types of log for saving. The phone offers different debugging levels, each 

levels contains different sets of debugging messages to send. 

When you have finished the settings, click 

Submit

. Go to the Save Changes page and click 

Save

 to 

reflect the changes. 

 

3.9 System Auth 

In System Authority, you can change your login name and password. 

 

 

3.10 Save 

Changes 

In Save Changes, you can save the changes you have done. If you want to use new setting in the IP 

Phone, You have to click 

Save

. After you click 

Save

, the IP Phone will automatically restart and the 

new settings will take effect. 

Summary of Contents for SP5103











































Reviews: