MicroNet SP5103, User Manual

Page: 13 / 42

7
CFI 0~1
Status Show WAN, LAN IP address and MAC address.
2.3.5 SIP Setting
If you want to use keypad to set the SIP setting, you have to go to item 8 Sys. Authority to input the
password or you can not change the SIP setting.
Name Description
Service Domain First/Second/Third
Realm
The realms include following information. You can press
“1*#”, “2*#”, and ”3*#” to change among these three SIP
realms.
Activation:
To enable or disable the realm.
User Name:
The SIP’s user name.
Display Name:
The SIP’s display name.
Register Name:
The SIP’s registered name.
Register Pwd.:
The SIP’s password.
Proxy Server:
The address of SIP proxy.
Domain Server:
The address of domain server.
Outbound Proxy:
The address of outbound proxy.
Codec Type The codec type includes G.711 uLaw, G.711 aLaw,
G.723, G.729, G.726-16, G.726-24, G.726-32, and
G.726-40.
Codec
VAD Voice Active Detection Enable/Disable.
Outband DTMF Enable/Disable outband DTMF. RTP Setting
Duplicate RTP
No Duplicate:
Do not resend the voice packages.
One Duplicate:
Resend voice packages one time.
Two Duplicate:
Resend voice packages two times.
RPort Setting RPort Enabled/Disabled
Hold by RFC Enable/Disable Holding the calls, according to RFC3261.
Status Show the SIP Proxy register status. You can use UP/Down key to check each
Realm’s status.