38
Polarity Reversal Signal.
z
Current Drop-> 1 S: Enable FXS interface to generate one second Current
Drop signal.
z
Current Drop-> 2 S: Enable FXS interface to generate two seconds Current
Drop signal.
z
Current Drop-> 3 S: Enable FXS interface to generate three seconds
Current Drop signal.
C.
Called Number Relay on FXS
：
Define when use the FXS interface to outbound call, resend or Drop out the dialed
number.
Drop out: Do not send the dialed number. When use the FXS port direct
connect to phone set for outbound call, please enable the “Drop out” function
to avoid hear the unnecessary dialed number when answer the phone call.
Resend: Resend the dialed number. When use the FXS port to connect to
PBX line for outbound call, please enable the “Resend” function to redial the
destination number by DTMF, this will cause the PBX transfer to the call to the
final user.
D. Caller ID Generate type:
Define the Caller ID (CID) signal generate format:
Disable: Disable, do not send CID signal.
DTMF: Send CID signal by DTMF format.
FSK Bell: Send CID signal by FSK Bell format.
FSK ETSI: Send CID signal by FSK ETSI format.
E. Caller ID Detect Mode
：
Define the CID detect format of FXO interface:
Disable: Disable, Do not detect any CID signal
DTMF: Enable detect CID signal by DTMF format.
FSK Bell: Enable detect CID signal by FSK Bell: format.
FSK ETSI: Enable detect CID signal by FSK ETSI: format.
F.
When VoIP call out, send ANI by:
Define when VoIP call out, use the below number as the Caller ID (ANI):
Register Number: Use the gateway register number as ANI.
Line Number: Use the line number setting on the
/VoIP Setup/Line
