![MicroNet SP5004P User Manual Download Page 30](http://html1.mh-extra.com/html/micronet/sp5004p/sp5004p_user-manual_1787836030.webp)
29
3.2 CALL HOLD
Place a call on hold by pressing the “flash” button on the analog phone (if the phone has
that button).
Press the “flash” button again to release the previously held Caller and resume
conversation. If no “flash” button is available, use “hook flash” (toggle on-off hook quickly).
You may drop a call using hook flash.
3.3 CALL WAITING
Call waiting tone (3 short beeps) indicates an incoming call, if the call waiting feature is
enabled. Toggle between incoming call and current call by pressing the “flash” button.
First call is placed on hold. Press the “flash” button to toggle between two active calls.
Please enable CallWaiting on the
VoIP Call in
(
/VoIP Setup/Routing Setup/ VoIP Call in/)
.