37
(4) Line configure/ Line Feature
/VoIP Setup/Line Configure/ Line Feature
This page defines the feature on the phone port of the VoIP router.
A.
Dial Pause signal length(as ,)[100~3000] ms:
Define the pause time (ms) of the “,” on the
/Routing Setting/VoIP Call Out/
. This
pause time is usually for time delay when connect to PBX and used for seize the CO
line. The default pause time is 1000ms. The input range is between 100 to 3000 ms.
User can use more then one “,” to get longer delay time.
B.
Loop Current Drop & Polarity Reversal Generate
：
Define the signal generated on local side when remote side disconnects:
z
Disable: Disable the Loop current Drop and Polarity Reversal Generate
signal, only generate busy tone.
z
Polarity Reversal-> Enable:
Enable FXS interface to generate the
