MaxNAS Owner’s Manual
45
3.1.4 On the
iSCSI Initiator Properties
window, select the
Targets
tab. With the iSCSI target
highlighted, click
Log On
. The
Log On to Target
dialogue will appear. To enable a persistent
connection, check the “Automatically restore this connection” checkbox. If you have not enabled
CHAP authentication on the MaxNAS click
OK
. If you have enabled CHAP, click
Advanced
.
Under Advanced Settings check the
CHAP login information
checkbox and enter your
username and password. Click
OK
to
commit
CHAP
authentication, and
OK
on the
iSCSI Initiator properties window.
3.1.5. Open the disk management console. A list of the attached drives and their respective
volumes will appear. Each Volume set will appear as an individual disk in the management
console. Upon the first time the MaxNAS iSCSI volume is connected, an “Initialize and Convert
Disk Wizard” should appear when the disk management console is run. You may use the
Wizard to set up the volume or follow the next steps for manual configuration.
Note:
The Disk Management Console can be found under \Windows\System32\diskmgmt.msc on your system
drive. For an illustrated guide, please see
http://www.fantomdrives.com/support/faqs/hdfaqpc.php4#8
Enable CHAP
4-Connecting Users
