MicroNet InTagral Plus, User Manual

Page: 45 / 70

InTagral™ Plus
Time & Attendance Clock
Page 4-13
4.3.4. Reset Clock
The Reset Clock option allows you to reset of the time clock's internal clock
software. This can prove useful if for any reason clock processing becomes
suspended.
4.3.4.1. To reset the InTagral™ Plus internal software:
1. Slide a Supervisor Card through the Card Reader at the bottom of the
clock. The Supervisor Menu is displayed (see Figure 4-7).
2. Click 3. The Display Screen goes blank, and the clock sounds a short,
high-pitched sound to indicate that it is restarting. The word 'WAIT'
displays on the screen for a short moment, followed by the Normal
Display screen. The time clock is now reset.
IMPORTANT
In the event that you encounter a processing halt such that the Time Clock does not respond
when you slide the Supervisor Card through the Card Reader, you may have to perform a
Warm System Restart.
4.3.4.2. Performing A Warm Restart of the Time Clock
To execute a Warm System Restart, perform the following:
1. Press and hold down the Up Arrow [ ] + [6] + [ENT] , and then
release them together. The time clock restarts at the Main Menu.