Revision History
Rev. H – 9/17
• Change Power Pin P3 to SAS Power Disable from NC
• Updated Regulatory Compliance section
Rev. G – 10/16
• Production status
• Updated DWPD endurance specification for S630DC 400GB
Rev. F – 3/16
• Updated LBA setting tables, power matrix table, performance numbers, and endur-
ance specifications
Rev. E – 12/15
• Updated Performance table in Features section
Rev. D – 11/15
• Revised maximum operating temperature to 50°C
Rev. C – 9/15
• Revised specifications, densities, and MPNs
Rev. B – 6/15
• Revised specifications, densities, and MPNs
Rev. A – 5/15
• Initial release
8000 S. Federal Way, P.O. Box 6, Boise, ID 83707-0006, Tel: 208-368-4000
www.micron.com/products/support Sales inquiries: 800-932-4992
Micron and the Micron logo are trademarks of Micron Technology, Inc.
All other trademarks are the property of their respective owners.
This data sheet contains minimum and maximum limits specified over the power supply and temperature range set forth herein.
Although considered final, these specifications are subject to change, as further product development and data characterization some-
times occur.
S600DC Series 2.5-Inch SAS NAND Flash SSD
Revision History
CCMTD-1725822587-3891
s600dc_series_2_5_sas_ssd.pdf - Rev. H 9/17 EN
37
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2015 Micron Technology, Inc. All rights reserved.
