manualshive.com logo in svg

Micron MTFDJAK200MBW, Manual

Share
Download
Micron MTFDJAK200MBW Manual Download Page 17

Format Unit

The device may be formatted either as a thin provisioned device or a fully provisioned
device. Thin provisioned is the default format and is recommended for most applica-
tions. Thin provisioning provides the most flexibility for the device to manage the Flash
medium to maximize endurance.

Table 17: Format Unit Command Execution Times for 512-Byte LBAs

Format

Mode

DCRT

Bit

IP

Bit

All S600DC Series Devices (Capacity in GB)

Unit

200

400

480

800

960

1600

1920

3200

3840

Non-SED Configuration

Thin

provisioned

(Default)

0

0

5

5

5

5

5

5

5

5

5

minutes

Thin

provisioned

(Default)

1

0

5

5

5

5

5

5

5

5

5

Fully

provisioned

0

1

10

10

10

10

10

10

10

10

10

Fully

provisioned

1

1

10

10

10

10

10

10

10

10

10

SED Configuration

Thin

provisioned

(Default)

0

0

5

5

5

5

5

5

5

5

5

minutes

Thin

provisioned

(Default)

1

0

5

5

5

5

5

5

5

5

5

Fully

provisioned

0

1

430

430

430

430

430

430

430

430

430

Fully

provisioned

1

1

280

280

280

280

280

280

280

280

280

S600DC Series 2.5-Inch SAS NAND Flash SSD

Format Unit

CCMTD-1725822587-3891
s600dc_series_2_5_sas_ssd.pdf - Rev. H 9/17 EN

17

Micron Technology, Inc. reserves the right to change products or specifications without notice.

© 2015 Micron Technology, Inc. All rights reserved.

Summary of Contents for MTFDJAK200MBW






































Reviews:

No comments

Brands by name

Popular brands

Load more brands