Microm FX-3500 Installation And Operation Manual Download Page 11

Page: 11 / 99

3.0

FX-3500 Overview

This chapter lists all the possible components of an FX-3500 system.

3.1

FX-3500 Fire Alarm Control Panel Models

All FX-3500 Fire Alarm Control Panels have the following features:

•

Main Board, Power Supply and Backbox.

•

Multi-zone fire alarm control panel.

•

MAM-3500 Main Display with 4 x 20 LCD display.

•

Class A (Style 6), Class X (Style 7), or Class B (Style 4)

analog

loop(s).

•

Four Power Limited Class B (Style Y), Class A (Style Z) NAC circuits (max. 1.5 Amps
each - 6.0 Amps total).

•

Dedicated common alarm, supervisory, trouble, and auxiliary alarm relays.

•

Additional RAX-1048TZDS Display Adder Module can be added to provide 96
annunciation points per Adder.

•

Additional outputs include connections for a RTI remote trouble indicator, PR-300
Reverse Polarity Module, an RS-485 bus for connection of up to seven RAX-LCD-LITE,
RAM-3500-LCDs, SRM-312s and RA-1000 Series annunciators.

•

Auxiliary power is available in the form of 24V FWR unfiltered and unsupervised, 24VDC
filtered and regulated, and resettable auxiliary power supply.

Figure 1

FX-3500 with DOX-1024DSR

Summary of Contents for FX-3500




































































































Search results

Summary of Contents for FX-3500

Reviews:

Related manuals for FX-3500

Brands by name

Popular brands

Microm FX-3500, Installation And Operation Manual

Search results

Summary of Contents for FX-3500

Reviews:

Related manuals for FX-3500

Brands by name

Popular brands