49
Press the
UP
and
DOWN
cursor keys to scroll through all the devices on the loop for which the
report is available.
The first line pinpoints the exact CO device which needs to be replaced. Any device with a CO
cell that will expire in 14 months or less appears in the report.
If there are no CO devices, then the display shows “No CO Devices to report”.
9. AP Device Type
This option reports on the internal parameter value indicating the device type.
If the panel is connected to a printer, select an output source:
Select all loops or a specific loop.
If you selected a loop, enter the loop number of the desired device and press the
Enter
button.
The report shows the loop number and device address in the following format:
Press the
UP
and
DOWN
cursor keys to scroll through all the devices on the loop for which the
report is available.
The first line identifies the AP device, the second line specifies the device type ID, and the
third line specifies the company (3 for Mircom, 11 for Secutron, 51 for System Sensor).
10. AP Device Data
This option reports on the Advanced Protocol device information. Generate this report when
requested by technical support.
If the panel is connected to a printer, select an output source:
Select all loops or a specific loop.
Loop 1 Addr. 5
CO cell to expire in
7 months
- Report To -
1. Printer
2. Screen
1 All
2 Loop
Loop Number
Loop :__
Loop 1 Addr. 107
AP Type: 56
OEM: 3
- Report To -
1. Printer
2. Screen
Summary of Contents for FX-3500
Page 2: ......
