52
13. Multi-addresses
This option reports devices that have the same address.
If the panel is connected to a printer, select an output source:
If you selected “Printer”, select the address range. “All” selects all addresses from all
configured loops and “Loop” selects addresses from one loop.
If you selected “Loop”, enter a loop number:
If the panel does not have a printer connected or if you selected “Screen”, the following screen
appears:
Select “yes” to
detect duplicate address
es
using AP commands
.
Select “no” to
detect
duplicate addresses
by measuring the overcurrent on the loop
.
Press the
UP
and
DOWN
cursor key scroll through the devices.
If you selected “yes”, the message “*** Multiple dev address” appears beside the devices
with the same
address
.
If you selected “no”, the message “*** Multiple dev address” appears beside the address
that is shared by more than one device.
5.11.5
Clear Logs
Clears the logs stored in the flash memory. Use the
UP
and
DOWN
cursor keys to the desired
log to be cleared and press the
Enter
button.
A message prompts for confirmation.
- Report To -
1. Printer
2. Screen
1. All
2. Loop
Loop Number
Loop: _
Digital method ?Y
Loop 1 Addr. 107
Serial no:971C2A6D
Tested
Select Log
1. Alarm Log
2. General Log
3. All Logs
Summary of Contents for FX-3500
Page 2: ......
