EN
33
BT
«
HI»
Pulse or cuff
pressure too
high
The pressure in the cuff
is too high (over 300
mmHg) OR the pulse is
too high (over 200 beats
per minute). Relax for 5
minutes and repeat the
measurement.
«
LO»
Pulse too
low
The pulse is too low (less
than 40 beats per minute).
Repeat the measurement.
«
Er 3»
No pressure
in the cuff
An adequate pressure
cannot be generated in
the cuff. A leak may have
occurred. Replace the
batteries if necessary.
Repeat the measurement.
«
Er 5»
Abnormal
result
The measuring signals are
inaccurate and no result
can therefore be displayed.
Read through the checklist
for performing reliable
measurements and then
repeat the measurement.
