32
Error messages
If an error occurs during measurement, the
measurement is interrupted and an error message
«Er» is displayed.
•
Please consult microlife, if
this or any other problem
occurs repeatedly.
•
If you think the results are
unusual, please read through
the information in this
instruction manual carefully.
Error
Description
Potential cause and
remedy
«
Er 1»
Signal too
weak
The pulse signals on the cuff
are too weak. Re-position
the cuff and repeat the
measurement.
«
Er 2»
Error signal
During the measurement,
error signals were detected
by the cuff, caused for
instance by movement or
muscle tension. Repeat the
measurement, keeping
your arm still.
