23
Special Function (cont.)
Taking fewer than three measurements
In
«FOLLOW-UP» Mode, the measurement
sequence can be stopped at any time. By
pushing the Start/Stop button the remaining
measurements in the sequence will be cancelled.
Data from the measurements completed can be
viewed by pushing the M Button.
Skipping the 60-second countdown
In
«1st VISIT» and «FOLLOW-UP» Mode, the
60-second pre-measurement countdown can be
skipped by pushing the Start/Stop Button. Once
the Start/Stop Button is pushed, the device will
immediately begin the next measurement.
*
The device can put into Stand by Mode by pressing
the Start/Stop Button after the completion of
measurements. The device will automatically switch to
Stand by Mode if left unattended for five minutes.
Cancels remaining
measurements at
anytime during
the measurement
sequence.
Skips the 60-second
countdown and begins
measurement.
Stand by mode
