13
AUSCULT 1st FOLLOW UP
AUSCULT 1st FOLLOW UP
AUSCULT 1st FOLLOW UP
Taking measurements using WatchBP Office
«AUSCULTATION» Mode
1)
Turn on the power – Turn on the device by
switching the I/O switch at the back of the
device into the ON position and make sure
Bluetooth switch is in off position.
3)
Switch to «AUSCULTATION» Mode – Slide the
Mode Switch to «
AUSCULTATION» Mode.
2)
Apply the cuff* – Properly fit one cuff to the
preferred measurement arm.
DC 6V 600mA
DC 6V 600mA
*
Additional visual instruction can be found on the cuff
4)
Adjust inflation pressure if necessary –
Inflation pressure can be set manually from 140
to 280 mmHg by pressing and holding the Start/
Stop Button for 7 seconds.
Press the M Button to adjust the pressure and
press Start/Stop to save the setting.
