EN
18
AUSCULT 1st FOLLOW UP
AUSCULT 1st FOLLOW UP
AUSCULT 1st FOLLOW UP
«FOLLOW-UP» Mode
1)
Turn on the power – Turn on the device by
switching the I/O switch at the back of the device
to the ON position and make sure Bluetooth
switch is in off position.
3)
Switch to «FOLLOW-UP» Mode – Slide the Mode
Switch to «
FOLLOW-UP» Mode.
4)
Select the inflation cuff – Set the device to
inflate only the designated (right or left) cuff.
Press and hold the M Button for 3 seconds.
2)
Apply the cuff – Properly fit one cuff to the
preferred measurement arm.
Press and hold
for 3 seconds...
*
Additional visual instruction can be found on the cuff
DC 6V 600mA
DC 6V 600mA
